Low Strength 4-3/4 Ends 1 x 1 Cones

Low Strength Sansoe Snap Ties are manufactured from medium high carbon wire with standard head washers and 1 X 1 plastic spreader cones made of high impact styrene plastic. Low Strength Sansoe Snap Ties provide a safe working load of 2250 lbs. with an average ultimate load of 4500 lbs. Adequate end clamps are required to develop safe working loads.

Safe working loads based on the American Concrete Institute’s recommended practice for concrete formwork. A safety factor of 2:1 is required for all concrete form work applications.

SKU	Info/Size
5LSSW04FG	Snaptie LS SW 04″
5LSSW06FG	Snaptie LS SW 06″
5LSSW07FG	Snaptie LS SW 07″
5LSSW08FG	Snaptie LS SW 08″
5LSSW09FG	Snaptie LS SW 09″
5LSSW10FG	Snaptie LS SW 10″
5LSSW11FG	Snaptie LS SW 11″
5LSSW12FG	Snaptie LS SW 12″
5LSSW13FG	Snaptie LS SW 13″
5LSSW14FG	Snaptie LS SW 14″
5LSSW15FG	Snaptie LS SW 15″
5LSSW16FG	Snaptie LS SW 16″
5LSSW18FG	Snaptie LS SW 18″
5LSSW20FG	Snaptie LS SW 20″
5LSSW22FG	Snaptie LS SW 22″
5LSSW24FG	Snaptie LS SW 24″
5LSSW30FG	Snaptie LS SW 30″
5LSSW32FG	Snaptie LS SW 32″
5LSSW36FG	Snaptie LS SW 36″